Weles team installing new hardwood floor in a Massachusetts home

Hardwood Floors in Dover, MA

Most flooring companies bill dust extraction as an extra. On every Dover MA job it is already in the price. And if you need to stay in the house while we coat, Bona Traffic HD has your furniture back in three days, where an oil-based finish keeps you out for fourteen.

Free Estimate

Dustless sanding by default with HEPA 90-95% dust protection.

0% financing available for up to 12 months.

Certified by Lagler, Loba, Wakol, Bona, and American Sanders.

Dedicated project managers, in-house showroom, fully insured.

Callback in 1 business day (617) 618-8395

3,000+ Hardwood Floors Finished
Across New England Since 2017

Hardwood Floors in Dover, MA
8Years
Experience
Working

Welcome to Weles Wood Floor Services, a Massachusetts hardwood flooring company serving Dover and the surrounding towns of Norfolk County. We have excellent ratings on Houzz and Yelp, with over 250 customer reviews on GoogleThumbtack and Angi.

Weles Wood Floor Services is fully accredited with the Better Business Bureau. Learn more by visiting our BBB profile.

We handle hardwood floor installation, refinishing and repair in Dover, and we do almost all of that work inside occupied single family homes. Town-wide housing data shows that 38% of Dover’s housing units were built between 1960 and 1979 and another 17% date back to before 1939. 94% of all units are single-family homes. In practice that means one of two floors: strip oak sanded once or twice before from the mid-century, or original softwood and wide plank in an antique house. Either way, the family is still living there while we work, so dustless floor sanding is included on every Dover project by default, using HEPA-filtered vacuums that reduce airborne dust by 90–95% while we sand, with exposed areas covered in plastic film.

Dover floor plans also tend to be large and open due to the town’s residential zoning, which is based on half-acre, one-acre and two-acre districts. Open square footage is where the Lagler Trio takes its place. The most advanced fine sanding machine on the market, it gets rid of straight and chattering marks, instead of softening them, and produces a furniture quality surface. Just about 5 percent of Massachusetts flooring companies have one. Moisture is our top concern for installations: we acclimate wood on site for several days, take subfloor readings with high-sensitivity meters, and don’t fasten until the difference between subfloor and hardwood is within 4%. That step is especially important in Dover, where many parcels are close to the Charles River and town conservation land, and where indoor humidity varies from a humid summer to a dry heating season every year (NOAA Climate Normals). Get that right and the floor stays tight through the seasons instead of gapping every January.

Finishes You Can Live With

Dover projects tend to be whole-floor or whole-house projects, and it’s not a realistic plan to move a family out of a big single-family home for two weeks. Oil based finishes are 700 VOC, and take 14 days until the house is ready for furniture. Instead we use Bona Mega One (200 VOC) and Bona Traffic HD (150 VOC). You can live in the house during coating, and both cure fully in 3–5 days instead of 14. Traffic HD is the most durable water-based finish on the market, and it’s what we’d put in a back hall or kitchen that gets dogs, kids and mudroom traffic every day of the year.

We have done floors in Dover, and the neighboring towns of Needham, Medfield and Westwood. Check out our portfolio to see how those projects turned out and our YouTube channel if you want to see the machines in action. Repair usually beats a full sand for Dover’s oldest houses. Dover’s antique stock goes back to its 18th-century farmhouses, the clearest surviving example being the 1774 Benjamin Caryl House on Dedham Street. Old floors have very little wear layer left. Dover’s Historical Commission has operated a demolition delay by-law since 1996, and that same preference for preserving original material extends indoors. We fix and restore by replacing the broken boards, fastening those that are loose and blending the patch with the rest of the floor, keeping the old wood in the house and the room functional for everyday use.

What Our Clients Say About Our Hardwood Floor Services

5.0 272 verified reviews from Google, Angi and Thumbtack

Portfolio and showroom

Portfolio

Finished floors from the Dover MA area and beyond, photographed on the job rather than bought from a stock library. Refinishing, new installation and stair work.

Showroom

See the wood species in person or online. You can browse the showroom online or visit us at 800 Boylston St, Chestnut Hill, MA 02467.

Our Hardwood Services in Dover MA

Dustless hardwood floor refinishing in a attic.

Hardwood Floor Refinishing in Dover MA

In Dover, refinishing hardwood floors typically begins with mid-century strip oak. The floors themselves are generally structurally sound, but have chatter marks and a worn, uneven surface from previous sanding work. For that we can go up to the updated Epoch HD fine buffer with a six head metal attachment. It weighs 50% more than a normal buffer and has heads turning in different directions at the same time. This cuts the surface layer and removes the chattering marks left by a single disc buffer. It’s all done with dustless sanding so the rest of the house is livable. Our staining process uses Bona DriFast in 24 mixable colors to match existing trim and cabinetry. We finish with water-based topcoats that hold their color instead of ambering, and can withstand Dover’s seasonal humidity swings and everyday family traffic.

More About Refinishing
New hardwood floor installation in a sunlit living room.

Hardwood Floor Installation in Dover MA

Dover homeowners generally want a floor that suits an older or mid-century home without appearing to be a period reproduction, and that can handle a busy household. Our hardwood installation services are performed by experienced hardwood flooring installers who follow NWFA installation standards from the first delivery to the last board. We use Select and Better grade lumber, and it acclimates on site for several days before anything goes down. Subfloor flatness and moisture get checked with high sensitivity meters, and we put a moisture barrier where the subfloor calls for one. Fasteners are selected for their resistance to oxidation and breakage, and any board wider than 3¼ inches is fastened and glued. We’ll also give you our take on what species and finish we would personally install in your space, based on light, traffic and how the space is actually used.

Hourglass icon Long-term Investment
Hammer icon Proper Installation
Water icon Moisture Regulation
Puzzle icon Appropriate Underlayment
More About Installation

Dover MA Hardwood Floor Products

Species, grades and finishes from the Chestnut Hill showroom

Red oak, white oak, maple and walnut flooring samples side by side.

We stock and source the species most Massachusetts floors are built from: red oak, white oak, maple, ash, birch and walnut, plus the stains, adhesives and finishes that go with them. Samples are in the showroom at 800 Boylston St, and we sell to homeowners, builders and other flooring contractors.

Most homes in the Dover MA area built between roughly 1900 and 1960 have 2¼″ plainsawn red oak strip. If you are repairing or extending a floor rather than replacing it, width, species and cut all have to line up, or the new wood will always read as a patch. Bring in a loose board or an offcut and we will match it against stock.

The products page goes further into grades, how each species behaves underfoot, and when engineered board or luxury vinyl is the better call than solid wood.

Browse products

Get a written estimate for your Dover MA floor

Square footage and service type are enough to price the job. You get a number back within one business day, and 0% financing is available for up to 12 months.

Request Free Estimate

Why Choose Weles Wood Floor Services?

Every job uses dustless sanding, with HEPA extraction that keeps roughly 90 to 95% of the dust out of the rest of the house. We check moisture before fastening a board and hold the subfloor-to-wood difference inside 4%. Seven crews run the work, and a project manager answers seven days a week.

Request estimate

F.A.Q

FREQUENTLY ASKED QUESTION

Room with hardwood floors

Chapter 93, adopted at the May 6, 2024 Annual Town Meeting, limits construction equipment and the staging of materials outside a structure to Monday through Friday, 7 a.m. to 6 p.m., and Saturday, 9 a.m. to 1 p.m., with nothing on Sundays. Sanding itself happens indoors, but unloading machines, emptying vacuum drums and moving lumber all happen in the driveway, so we book Dover jobs inside those hours and treat Saturday as a half day. Fines step from $100 to $300 for repeat violations.

Where the trucks park, mostly. Roughly 70 percent of Dover homes draw from private wells and nearly all treat wastewater on site, so before a van or a lumber delivery pulls off the driveway we ask where the tank and leach field sit; a loaded truck over a leach field can crush pipe or compact the soil the system depends on. The well water and the finish chemistry never meet, so the flooring decision is unaffected; the point is simply to keep the vehicles on pavement or gravel and off the drain field.

Whole-home work runs $6,000 to $12,000 and up, which is what $4 to $5.50 per square foot produces once stairs, closets and a second floor are in the count. A 2,500 square foot Dover colonial from the 1960s or 1970s with oak on both levels sits at the top of that range or above it, and a stain adds 3 to 5 working hours per 1,000 square feet before the sealer. Rooms still carpeted over original oak are priced once the carpet is up, since what is under it decides the grit and the hours.

Figure $2 to $5 more per square foot in labor. Straight-lay strip runs $3 to $8 per square foot to install, while herringbone, chevron or parquet runs $8 to $10 and up, on top of material; supplied and installed, hardwood in any pattern lands between $10 and $22 per square foot. In an open Dover floor plan, a herringbone field with a straight border is a common way to hold the cost, and the 5 by 28-1/2 inch herringbone blocks stocked at the Chestnut Hill showroom are sold by the square foot.

Fifty to more than eighty machine hours for a standard sand, since a belt sander, edger, buffer and hand work total 21 to 33 hours per 1,000 square feet; adding the Epoch HD buffer and Lagler Trio for a furniture-grade surface takes that to roughly 78 to 115 hours. Spread across Dover's permitted weekday hours that is one to two working weeks of sanding, with water-based coats following at one to two hours each. The family stays in the house throughout, moving room to room ahead of the machines.

Hardwood Floors Tips

Check Blog for More
How to Fix Wood Floor Gaps

How to Fix Wood Floor Gaps | Full Guide

Hairline gaps that open in February and close by June are seasonal. A heated New England house falls from 50 to 60 percent humidity in summer to 20 to 30 in winter, and solid oak shrinks with it. A gap still open in July is worth a call.

Read the full guide
Wood Floor Water Damage

Wood Floor Water Damage

Cupped boards that stayed nailed down usually flatten once the subfloor dries to within 4 percent of the flooring, which takes weeks rather than days. Buckled boards are replaced. Sanding too early turns cupping into crowning.

Read the full guide
How Long To Stay Out After Floor Refinishing?

How Long To Stay Out After Floor Refinishing?

With a water-based finish you stay home. Bona Traffic HD is 150 g/L VOC, dries in one to two hours a coat, and takes furniture after three days. Oil-based Woodline needs 14 days and an empty house.

Read the full guide

Contact Us

Weles works across New England from two locations, with Greater Boston as home ground. Dover MA is served from the showroom at 800 Boylston Street in Chestnut Hill and from the Ashland base, and one of three project managers picks up seven days a week. The map shows the Chestnut Hill showroom, where the plank stock and finish samples are kept.

How to Contact us?

Reach us at (617) 618-8395, send us an email at weles.usa@gmail.com, or simply fill out the form and we'll get back to you as soon as possible.

Contact Weles